The Differences Between AGM, GEL and FLOODED Batteries

Even though inside all AGM, GEL and flooded batteries contain lead acid, the internal construction of the battery divides them into their respective categories.

Absorbed Glass Matte or "AGM" batteries

• They are a relatively new technology in lead-acid batteries.
• An AGM battery uses a separator consisting of fiberglass between the plate and wrappers to hold the electrolyte in its place with capillary action.
• Combining the lead plates, electrolyte, and fiber glass separation fibers in a confined space, AGM batteries create a "physical bond" by way of capillary action.
• Similar to how water creeps up a towel when it is put in a bathtub. This capillary action holds the liquid inside the glass matting, making the AGM Battery "spill proof" if it is ever exposed.
• Due to the tight packing of an AGM battery, it is also the most impact resistant, and boasts the least internal resistance.
• The lower internal resistance increases the output voltage, decreases charging time, and reduces losses to heat as power flows through the system.
• AGM Batteries are maintenance free. Premium AGM batteries recombine the gases produced internally, back into liquid.
• This recombination makes the AGM battery maintenance free.
• No acid leaks, no mess while charging, no corrosion on surrounding parts. You plug in these batteries and walk away.
• AGM batteries have a slight advantage over GEL batteries.

Flooded or "Wet Cell" batteries

Most commonly used batteries on the market today.

• Flooded batteries come in the widest variety of shapes and sizes due to their widespread usage in a multitude of industries and applications.
• Flooded batteries again use lead plates, a sulfuric acid electrolyte, and plate separators.
• Usually flooded batteries are not sealed, and do not recombine the gases to liquids internally.
• Instead, these gases are vented externally. Internal gases produced are released directly to the environment.
• Through these same vents can flow acid, steam, and condensation, leading to maintenance.
• Flooded batteries do require maintenance, in the form of water, to routinely replenish lost electrolyte through the vents.
• Lead plates start to deteriorate when they touch the atmosphere, so if you fail to maintain your batteries, they will corrode and fail.
• Flooded batteries hold very good rates of charge for the price, but require more work.
• Unfortunately due to the internal construction, flooded batteries have the weakest internal construction, and some very high internal resistance statistics.

GEL cell batteries

• Also sealed just like the AGM battery listed above.
• But they differ in construction, a GEL battery uses a silica to turn the sulfuric acid into a jelly like substance.
• This jelly is then used as the electrolyte. Great care must be taken with GEL batteries not to expose them to high amperage situations.
• High amperage situations can literally 'SCAR' the jelly inside of a GEL battery, creating a pocket.
• These pockets allow the plates to begin corroding, leading to premature failure.
• GEL batteries should not be used for fast charging/discharging, or high amperage charging/discharging situations.
• Use the other types listed above for these high amperage situations.
• GEL Batteries are slightly stronger in regards to internal construction than a flooded battery, but weaker in comparison to the physical strength of an AGM battery.